Swansea • WalesBS EN 12150-1

Toughened Safety Glass (Tempered) in Swansea

Commercial specification parameters, local district requirements, and regional supplier discovery for toughened safety glass (tempered) across Swansea (Abertawe).

Local Commercial Requirements in Swansea

In Swansea, projects specifying toughened safety glass (tempered) frequently encounter specific architectural conditions across commercial zones like SA1 Waterfront, Swansea City Centre, Maritime Quarter. Direct Atlantic maritime wind exposure, high wind suction on coastal elevations, requiring marine-grade stainless hardware.

Local Building Authority Compliance:Subject to City and County of Swansea Council (Building Regulations Wales) building control and UK Building Regulations Approved Documents (England & Wales).

Verified Technical Specifications (BS EN 12150-1, BS EN 12600 (Class 1C1), Approved Document K, BS EN 14179 (Heat Soaked))

Safety Class:Class 1C1 (BS EN 12600: drop height 1200mm)

Acoustic Reduction:Rw 29 (-2; -3) dB (4mm) to Rw 35 (-1; -2) dB (12mm) — exhibits marked coincidence dip at critical frequencies

Typical U-Value:5.7 to 5.8 W/m²K (monolithic vertical, EN 673) — requires IGU assembly with Low-E coating for thermal compliance

Cold Cutting:Prohibited

Monolithic float glass subjected to controlled heating to approximately 620°C followed by rapid forced-air quenching, inducing balanced compressive stresses (>= 69 to 100+ MPa) on exterior surfaces and tensile stress within the core (BS EN 12150-1).

Procurement in Swansea

Source Toughened Safety Glass (Tempered) from Verified Suppliers

Find commercial glazing merchants and accredited installers covering SA1, SA2.

Search Swansea Suppliers