Kenilworth • EnglandBS EN 12150-1

Toughened Safety Glass (Tempered) in Kenilworth

Commercial specification parameters, local district requirements, and regional supplier discovery for toughened safety glass (tempered) across Kenilworth, Warwickshire.

Local Commercial Requirements in Kenilworth

In Kenilworth, projects specifying toughened safety glass (tempered) frequently encounter specific architectural conditions across commercial zones like Kenilworth Central Business Quarter, Kenilworth High Street & Retail Precinct, Kenilworth Commercial & Industrial Park. Zone 1 (Midlands Inland): Inland temperate microclimate with standard Part L thermal U-value compliance (≤1.2 W/m²K) and solar heat gain mitigation (g-value ≤0.35).

Local Building Authority Compliance:Subject to Warwickshire Building Control building control and UK Building Regulations Approved Documents (England & Wales).

Verified Technical Specifications (BS EN 12150-1, BS EN 12600 (Class 1C1), Approved Document K, BS EN 14179 (Heat Soaked))

Safety Class:Class 1C1 (BS EN 12600: drop height 1200mm)

Acoustic Reduction:Rw 29 (-2; -3) dB (4mm) to Rw 35 (-1; -2) dB (12mm) — exhibits marked coincidence dip at critical frequencies

Typical U-Value:5.7 to 5.8 W/m²K (monolithic vertical, EN 673) — requires IGU assembly with Low-E coating for thermal compliance

Cold Cutting:Prohibited

Monolithic float glass subjected to controlled heating to approximately 620°C followed by rapid forced-air quenching, inducing balanced compressive stresses (>= 69 to 100+ MPa) on exterior surfaces and tensile stress within the core (BS EN 12150-1).

Procurement in Kenilworth

Source Toughened Safety Glass (Tempered) from Verified Suppliers

Find commercial glazing merchants and accredited installers covering CV.

Search Kenilworth Suppliers