Irlam • EnglandBS EN 12150-1

Toughened Safety Glass (Tempered) in Irlam

Commercial specification parameters, local district requirements, and regional supplier discovery for toughened safety glass (tempered) across Irlam, Greater Manchester.

Local Commercial Requirements in Irlam

In Irlam, projects specifying toughened safety glass (tempered) frequently encounter specific architectural conditions across commercial zones like Irlam Central Business Quarter, Irlam High Street & Retail Precinct, Irlam Commercial & Industrial Park. Zone 1 (Manchester Urban Core): Inland temperate microclimate with standard Part L thermal U-value compliance (≤1.2 W/m²K) and solar heat gain mitigation (g-value ≤0.35).

Local Building Authority Compliance:Subject to Greater Manchester Building Control building control and UK Building Regulations Approved Documents (England & Wales).

Verified Technical Specifications (BS EN 12150-1, BS EN 12600 (Class 1C1), Approved Document K, BS EN 14179 (Heat Soaked))

Safety Class:Class 1C1 (BS EN 12600: drop height 1200mm)

Acoustic Reduction:Rw 29 (-2; -3) dB (4mm) to Rw 35 (-1; -2) dB (12mm) — exhibits marked coincidence dip at critical frequencies

Typical U-Value:5.7 to 5.8 W/m²K (monolithic vertical, EN 673) — requires IGU assembly with Low-E coating for thermal compliance

Cold Cutting:Prohibited

Monolithic float glass subjected to controlled heating to approximately 620°C followed by rapid forced-air quenching, inducing balanced compressive stresses (>= 69 to 100+ MPa) on exterior surfaces and tensile stress within the core (BS EN 12150-1).

Procurement in Irlam

Source Toughened Safety Glass (Tempered) from Verified Suppliers

Find commercial glazing merchants and accredited installers covering M.

Search Irlam Suppliers