Horsham • EnglandBS EN 12150-1

Toughened Safety Glass (Tempered) in Horsham

Commercial specification parameters, local district requirements, and regional supplier discovery for toughened safety glass (tempered) across Horsham, Surrey.

Local Commercial Requirements in Horsham

In Horsham, projects specifying toughened safety glass (tempered) frequently encounter specific architectural conditions across commercial zones like Horsham Central Business Quarter, Horsham High Street & Retail Precinct, Horsham Commercial & Industrial Park. Zone 1 (Weald Inland): Inland temperate microclimate with standard Part L thermal U-value compliance (≤1.2 W/m²K) and solar heat gain mitigation (g-value ≤0.35).

Local Building Authority Compliance:Subject to Surrey Building Control building control and UK Building Regulations Approved Documents (England & Wales).

Verified Technical Specifications (BS EN 12150-1, BS EN 12600 (Class 1C1), Approved Document K, BS EN 14179 (Heat Soaked))

Safety Class:Class 1C1 (BS EN 12600: drop height 1200mm)

Acoustic Reduction:Rw 29 (-2; -3) dB (4mm) to Rw 35 (-1; -2) dB (12mm) — exhibits marked coincidence dip at critical frequencies

Typical U-Value:5.7 to 5.8 W/m²K (monolithic vertical, EN 673) — requires IGU assembly with Low-E coating for thermal compliance

Cold Cutting:Prohibited

Monolithic float glass subjected to controlled heating to approximately 620°C followed by rapid forced-air quenching, inducing balanced compressive stresses (>= 69 to 100+ MPa) on exterior surfaces and tensile stress within the core (BS EN 12150-1).

Procurement in Horsham

Source Toughened Safety Glass (Tempered) from Verified Suppliers

Find commercial glazing merchants and accredited installers covering RH.

Search Horsham Suppliers