Coventry • EnglandBS EN 12150-1

Toughened Safety Glass (Tempered) in Coventry

Commercial specification parameters, local district requirements, and regional supplier discovery for toughened safety glass (tempered) across Coventry.

Local Commercial Requirements in Coventry

In Coventry, projects specifying toughened safety glass (tempered) frequently encounter specific architectural conditions across commercial zones like Earlsdon, Kenilworth, Finham. High-density urban environment: elevated acoustic attenuation requirements (Approved Document E) and microclimate wind funnelling between commercial towers.

Local Building Authority Compliance:Subject to Coventry Building Control building control and UK Building Regulations Approved Documents (England & Wales).

Verified Technical Specifications (BS EN 12150-1, BS EN 12600 (Class 1C1), Approved Document K, BS EN 14179 (Heat Soaked))

Safety Class:Class 1C1 (BS EN 12600: drop height 1200mm)

Acoustic Reduction:Rw 29 (-2; -3) dB (4mm) to Rw 35 (-1; -2) dB (12mm) — exhibits marked coincidence dip at critical frequencies

Typical U-Value:5.7 to 5.8 W/m²K (monolithic vertical, EN 673) — requires IGU assembly with Low-E coating for thermal compliance

Cold Cutting:Prohibited

Monolithic float glass subjected to controlled heating to approximately 620°C followed by rapid forced-air quenching, inducing balanced compressive stresses (>= 69 to 100+ MPa) on exterior surfaces and tensile stress within the core (BS EN 12150-1).

Procurement in Coventry

Source Toughened Safety Glass (Tempered) from Verified Suppliers

Find commercial glazing merchants and accredited installers covering CO.

Search Coventry Suppliers