Burry Port • WalesBS EN 12150-1

Toughened Safety Glass (Tempered) in Burry Port

Commercial specification parameters, local district requirements, and regional supplier discovery for toughened safety glass (tempered) across Burry Port, Swansea.

Local Commercial Requirements in Burry Port

In Burry Port, projects specifying toughened safety glass (tempered) frequently encounter specific architectural conditions across commercial zones like Burry Port Central Business Quarter, Burry Port High Street & Retail Precinct, Burry Port Commercial & Industrial Park. Zone 3 (Gower & Swansea Bay Marine): Direct marine exposure subject to elevated coastal wind suction pressures (BS EN 1991-1-4) and salt-aerosol atmospheric corrosion. Requires 316-grade stainless steel hardware and structural SGP/PVB interlayer specification.

Local Building Authority Compliance:Subject to Swansea Council (Building Regulations Wales) building control and UK Building Regulations Approved Documents (England & Wales).

Verified Technical Specifications (BS EN 12150-1, BS EN 12600 (Class 1C1), Approved Document K, BS EN 14179 (Heat Soaked))

Safety Class:Class 1C1 (BS EN 12600: drop height 1200mm)

Acoustic Reduction:Rw 29 (-2; -3) dB (4mm) to Rw 35 (-1; -2) dB (12mm) — exhibits marked coincidence dip at critical frequencies

Typical U-Value:5.7 to 5.8 W/m²K (monolithic vertical, EN 673) — requires IGU assembly with Low-E coating for thermal compliance

Cold Cutting:Prohibited

Monolithic float glass subjected to controlled heating to approximately 620°C followed by rapid forced-air quenching, inducing balanced compressive stresses (>= 69 to 100+ MPa) on exterior surfaces and tensile stress within the core (BS EN 12150-1).

Procurement in Burry Port

Source Toughened Safety Glass (Tempered) from Verified Suppliers

Find commercial glazing merchants and accredited installers covering SA.

Search Burry Port Suppliers