BG
BUYGLASS.COM
Antrim • Northern IrelandEducation & WorkplaceBuilding Bulletin 100 (BB100)

Fire-Resistant Glass for Schools & Educational Buildings in Antrim

Architectural design guidance, candidate constructions, statutory Building Regulations, and local supplier procurement for Antrim, County Antrim.

Local Commercial Context & District Requirements in Antrim

In Antrim, executing specifications for fire-resistant glass for schools & educational buildings across commercial zones like Antrim Central Business Quarter, Antrim High Street & Retail Precinct, Antrim Commercial & Industrial Park, Outer Antrim Logistics Zone demands careful coordination with Antrim Council (NI Building Control) building control standards.

Local Authority & Statutory Oversight:Enforced under Antrim Council (NI Building Control) Building Control. In Northern Ireland, compliance follows Northern Ireland Technical Booklets.
Climatic Exposure & Acoustic Context:Zone 3 (Northern Ireland Coast & Inland): Direct marine exposure subject to elevated coastal wind suction pressures (BS EN 1991-1-4) and salt-aerosol atmospheric corrosion. Requires 316-grade stainless steel hardware and structural SGP/PVB interlayer specification.
Precision Specification

Commercial Frameless Glazed System Section

Full Height Partition & Perimeter Detail

Accessible Static View
150mm45mm12.8mm65mm200mm

Schematic exploded horizontal cross-section showing sequential structural placement.

01
Structural Soffit / Deflection Head(Cast Concrete & Steel Subframe)
150mmAbsorbs ±15mm floor slab live deflection
02
Top Acoustic Glazing Channel(Two-Piece Aluminium Pocket)
45mmAcoustic EPDM acoustic gasket seals
03
Acoustic / Safety Glazing Pane(12.8mm Acoustic Laminated)
12.8mmCentral sound isolation & impact barrier
04
Structural Base Shoe Channel(Heavy Extruded Aluminium Shoe)
65mmContinuous mechanical floor fixing to BS 6180
05
Structural Floor Slab & Screed(Reinforced Concrete Substrate)
200mmPrimary dead-load and moment anchor point
BS EN 12150 / BS EN 14449 Architectural ReferenceIllustrative diagram — project structural verification required
Technical Evaluation

Candidate Glass Constructions for Antrim Projects

Option 0114mm – 18mm Multi-Ply Intumescent

EI30 Intumescent Fire-Resistant Safety Glass

Best Suited For:Classroom corridor dividing walls, library partitions, and secondary circulation routes.
Engineering Trade-Offs:Provides full 30-minute integrity and thermal insulation (surface temperature < 140°C rise) preventing clothes from igniting; dual-certified to Class 1B1 impact safety.
Option 0223mm – 28mm Multi-Ply Intumescent in Certified Steel/Hardwood Frame

EI60 Heavy-Duty Intumescent Glazed Assembly

Best Suited For:Protected primary vertical escape stairwells, school atriums, and sports hall fire separation screens.
Engineering Trade-Offs:60 minutes full fire containment; substantially heavier dead-weight (~60 kg/m²) requiring structural frame anchors and heavy-duty pivot hinges.
Option 037mm – 11mm Modified Toughened / Gel Fire Glass

E30 / EW30 High-Level Transom Glazing

Best Suited For:High-level clerestory corridor fanlights above 2200mm where thermal radiation does not endanger escaping pupils.
Engineering Trade-Offs:Lower cost per m²; strictly limited to locations where full insulation (EI) is not mandated by the school fire risk assessment.

Architectural Design & Safety Checklist

Verify adherence to Building Bulletin 100 (BB100: Design for fire safety in schools) and Approved Document B.
Mandate dual certification: All glass below 1500mm in school doors and below 800mm in corridor screens MUST achieve both fire rating (EI) and BS EN 12600 Class 1B1 impact safety.
Verify permanent indelible fire safety kitemarks are visible after framing beads are fitted (essential for Building Control / Fire Authority sign-off).
Specify edge tape protection: Intumescent fire interlayers are sensitive to moisture and UV degradation; verify sealed perimeter tapes are intact prior to glazing.
Ensure door vision panels comply with Approved Document M: minimum glazed zone between 500mm and 1500mm from floor level to ensure small children and wheelchair users are visible.

Governing British & European Standards

Building Bulletin 100 (BB100)
Mandatory UK Government standard governing fire safety design, compartmentation, and escape routes in school buildings.
BS EN 13501-2 & BS 476-22
European and British fire classification: Integrity (E), Radiation Control (EW), and Thermal Insulation (EI).
BS EN 12600 Class 1B1
Highest level of impact safety preventing bodily puncture or laceration in active school circulation zones.

Antrim Site Logistics & Crane Handling

Lifting Equipment:Standard manual suction handling within HSE guidelines (<20kg per person).
Structural Substrate:Timber and steel fire frames must be secured with certified fire-rated fixings and intumescent mastic backing matching the Warringtonfire/Certifire test scope.
Site Tolerances:Glass pane expansion gap (typically 4–5mm per perimeter side) must strictly follow the fire test field of application report.

Procurement Advice for Antrim

Fire safety glazing in schools must be installed by certified fire door and screen installers (FIRAS or BM TRADA Q-Mark accredited) who provide formal system conformity certificates.

Direct Network Procurement for Antrim

Procurement Next Steps in Antrim

BuyGlass.com provides architectural specification guidance without sales commissions. When you are ready to tender or procure glass for your Fire-Resistant Glass for Schools & Educational Buildings project in Antrim, select the designated site in our network below:

Recommended for Fire-Resistant Glass for Schools & Educational Buildings in Antrim

Find Verified Antrim Installers

Local Marketplace • Independent Marketplace Directory (Network Partner)

Discover vetted commercial glazing installers, metalworkers, and fitting contractors covering Antrim postcodes (BT).

Local Procurement Advice:Fire safety glazing in schools must be installed by certified fire door and screen installers (FIRAS or BM TRADA Q-Mark accredited) who provide formal system conformity certificates.
Visit GlassSuppliers.co.ukGenerate Tender Specification BriefFallback: Download or print technical specification sheet for tendering to local specialist contractors directly.

Alternative Network Options for Antrim:

Direct Supply & Quote
BuyGlass.co
Toughened Glass Limited

Order CNC polished, pre-drilled toughened and laminated panels manufactured to exact millimeters and delivered directly to your Antrim site.

Visit BuyGlass.co
Advanced Envelopes
NEXTGEN.GLASS
Dynamic & Specialist Facades

Consult on dynamic electrochromic glass, vacuum insulating glazing (VIG), and complex structural walk-on floor calculations for Antrim architectural schemes.

Visit NEXTGEN.GLASS
Privacy & Tinting
tintsm.art
Retrofit PDLC & Solar Films

Retrofit existing Antrim commercial glass partitions and shopfronts with electronically switchable PDLC privacy film and manifestation graphics.

Visit tintsm.art
← Back to Antrim Commercial Glazing HubExplore All 10 Commercial Applications →